It is an advanced control system for the serious grower with plans of expansion and precision improvement. It allows for complete control over all greenhouse equipment, and the customization of energy usage to achieve maximum frequency. East to install, use and maintain, the system is very intuitive and can be directed to make immediate changes to input/output settings at any time, day or night. It also works as an effective irrigation controller, which helps cut out the unwanted cost of purchasing additional equipment. The sotware can monitor up to 128 controllers from a single PC.

  • Packages can  includes a controller w/ temp & RH sensors, 75' bottom heat/soil temp probe (non-threaded), solar light sensor w/ unshielded 50' cable, PAR light sensor w/ unshielded 50' cable, anemometer (wind & speed direction) w/ unshielded 40' cable, optical rain sensor w/ 50' unshielded cable, soil moisture sensor w/ 6' unshielded cable, and digital temp & humidity sensor inside w/ 100' shielded cable, digital temp & humidity sensor outside w/ 100' shielded cable, weather station w/ anemometer, temp probe w/ radiation shield, CO2 monitor (NEMA4 sealed), and barometric pressure sensor

 

Alarm Manager

  • Assign a "normal state" for each input
  • Determine a time delay for each input
  • Record a custom message that indicates the location of the alarm
  • Power alarm calls you if the system's power is cut off
  • Rechargeable back up battery if power outages occur
  • Plug-in wall transformer, splitter, and phone extension cable included
  • FCC approved and registered
  • Meshes with control complexity levels - from a simple thermostat system to a fully integrated control system
  • Requires 0.1A @ 115VAC

 

Thermostats are commercial-grade controls built to survive in wet and harsh environments.

Single-stage Thermostat features

  • One stage for heating or cooling.
  • One SDPT staged switch for heating or cooling.
  • Rugged weather resistant enclosure
  • Corrosion-resistant materials for long life
  • Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change.
  • Temperature range: 40 degrees to 110 degrees Fahrenheit (4 degrees to forty-three degrees Celsius)
  • NEMA 4X enclosure complies with NEC Article 547, UL Listed, CSA Certified
  • Inductive rating: 16A @ 120V, 13.2A @ 208V, and 12A @ 240V.

Two Stage Thermostat features:

  • Two stages for heating or cooling.
  • Two SDPT staged switches for heating or cooling.
  • Rugged weather resistant enclosure
  • Corrosion-resistant materials for long life
  • Low mass, high surface area of stainless steel coiled sensor provides rapid response to temperature change.
  • Temperature range: 40 degrees to 110 degrees Fahrenheit (4 degrees to forty-three degrees Celsius)
  • NEMA 4X enclosure complies with NEC Article 547, UL Listed, CSA Certified
  • Inductive rating: 16A @ 120V, 13.2A @ 208V, and 12A @ 240V.

 

 

*Order can be adjusted if everything is package is not desired

  • Returns are subject to at least a 30% restocking fee, plus any manufacturer's fees.

Environmental Control System